How to solve water leak from split AC?

                        Solve water leak from split AC?

How to Repair Split AC Water Leakage - STEP BY STEP

Tools Needed to Repair Water Leakage on AC:

  1. Screwdriver (to remove the panel)
  2. Empty bucket (to collect water)
  3. Shop-Vac vacuum cleaner (for removing excess water and dirt / dust)

How to Fix AC Leakage - Step by Step:

  1. Turn off the power switch of the AC unit
  2. Disconnect the AC unit from the mains
  3. Open the main front panel
  4. Remove air filters (clean air filters)
  5. Remove the screws on the front panel (usually 3 or 4 screws)
  6. Remove the large plastic cover (see video below for details)
  7. Click on the plastic clips at the bottom to access the drain pipe
  8. You will see a drain pipe at the bottom of the device.
  9. Use a bucket to collect water
  10. Remove any fittings or tape holding the drain pipe to the unit.
  11. Disconnect the drain pipe from the AC unit
  12. Allow the pipe to drain the water into a bucket
  13. If you have an industrial vacuum cleaner, use it to remove water from the pipe
  14. Secure the drain pipe with a fitting or tape
  15. Replace the main front panel
  16. Replace the air filters (make sure the filters are clean)
  17. Switch on the unit, let it run and check for water leaks

 See: What are the cases that cannot be ac water leakage solved with cleaning?


Comments

Popular posts from this blog

What are the cases that cannot be ac water leakage solved with cleaning?

Where 80% Air Conditioner Water Leakage Problems Occur?